Microcement · Orange County
Microcement in Orange County
Continuous surfaces that bring clarity to architectural forms.
Visualization
In short
Microcement is a thin cement-based coating applied in layers to create one seamless surface across walls, floors, showers and vanities, often over existing tile. About 200 sq ft on a flat, prepared surface takes four to six working days, because each layer needs time to cure.
- Look
- Seamless, fine-grained mineral surface
- Best for
- Bathrooms, showers, floors, vanities, fireplaces
- Moisture
- Showers and wet floors with the full waterproofing and sealer system
- Timeline
- 4–6 working days for about 200 sq ft on a flat, prepared surface
- Typical range
- $35–50 per sq ft
- Care
- pH-neutral cleaner; the sealer can be renewed over time
How it is built
7 layers, 4–6 days
Most of what you pay for in microcement is under the surface. This is the system over existing tile, from the tile up.
- 07Day 5
Detailing and sealing
Edges and the joins with floor and ceiling refined, then two coats of water-repellent sealer and a protective varnish.
- 06Day 4
Second microcement coat
A second fine coat refines the surface and evens the color.
- 05Day 3
First microcement coat
The first fine coat sets the color and texture.
- 04Day 2
Second base coat
Levels the surface and covers the grout lines of the tile below.
- 03Day 1
Mesh and first base coat
A fiberglass mesh is set into the first base coat to reinforce the surface.
- 02Day 1
Quartz primer
Gives the base coat grip on glazed tile.
- 01Day 1
Existing tile, checked
The room is protected and the tile is checked. Loose tiles and cracks are fixed before anything goes on.
- Layers
- 7 layers
- Time on site, 200 sq ft
- 4–6 days
- Build
- About 2–3 mm, no demolition
Where it works
Good places for microcement
- Showers and wet rooms, with the full system
- Bathroom floors and walls, often over tile
- Vanities, tubs and benches
- Fireplaces and kitchen walls
Where we suggest something else
Honest limits
- Tile or floors that move or sound hollow, until repaired
- Surfaces with rising moisture or active leaks
Technical details depend on the specific material system and your surface. We confirm them at the visit and in writing.
Investment
What microcement costs, and why.
The price follows the preparation your surface needs, the shape and height of the work, the system and how much hand work the finish takes. These ranges cover the finish system, protection and cleanup. Projects start at $1,800.
| Style | Typical range |
|---|---|
| Microcement | $35–50 / sq ft |
Example budgets
| Project | Area | Budget |
|---|---|---|
| Powder room floor and vanity wall | 120 sq ft | $4,200–$6,000 |
| Shower walls and floor | 180 sq ft | $6,300–$9,000 |
| Primary bathroom, floor and walls | 300 sq ft | $10,500–$15,000 |
Indicative only. Your written estimate follows the free on-site consultation.
Projects
Microcement projects
We publish only work completed under the CRAFTTERA name, with the scope, the location and the team’s role. The first microcement projects will appear here.
Compare
| Microcement | Venetian Plaster | |
|---|---|---|
| Look | Seamless, fine grain | Stone grain to high polish |
| Wet areas | Showers and floors, with full system | Powder rooms and splash zones |
| Typical range | $35–50 / sq ft | $16–24 / sq ft |
| Timeline | 4–6 days | 3–4 days |
Questions
Microcement: common questions
Is microcement waterproof?
Microcement is water-resistant once sealed, but in showers it relies on the waterproofing membrane underneath and the sealer on top. We install the full system, not just the visible coats.
Can microcement go over tile?
Yes, if the tile is well bonded. Loose or hollow tiles are fixed first, the grout lines are filled, and a bonding primer and mesh-reinforced base go on before the finish coats.
Is microcement slippery?
Like any smooth floor it can be slick when wet. For shower floors and bathrooms we use a finish texture and sealer with more grip, and we show you the difference on the sample.
Does microcement crack?
It follows the surface beneath it. Movement in the substrate can show as hairlines, which is why we check and repair it first and reinforce the base coat with mesh.
How soon can we use the bathroom?
Each layer has its own curing time, and the sealer needs time before water and full use. You receive the schedule in writing with your estimate, so you can plan around it.
Free on-site consultation
Thinking about microcement?
Share your location, a few photos and the finish you have in mind. If you are still comparing materials, we can help you understand the options.
We reply within 2 business hours.